Availability: | |
---|---|
Quantity: | |
3DM580
Features
High performance, cost-effective
Supply voltage up to 18-80VAC
Output current up to 7.2A
Self-adjustment technology
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-cicuit protection
Leadshine is a high performance 2-phase stepper drive based on advanced pure sinusoidal current control technology. It takes step & direction or CW/CCW control commands, and is very simple to implement in OEM applications.
stepper features anti-resonance which significantly reduces low-middle speed movement vibration/instability and motor noise. Because of the implementation of 3-state current control (On, Off, and Circulation), drive and motor heating are significantly lower than similar stepper drives on the markets. With the input voltage of 18 - 80 VAC and output current of 1.80 - 7.20 A, DMA860H can drive a wide range of 2-phase stepper motors with high precision at extra smoothness, quietness, and low motor heating.
stepper drive is easy to setup and configure via DIP switches. There are 16 resolution settings from 400 - 51200, and 8 output current settings from 1.80 - 7.20. Also, a user can simply set the idle current to full (100%) or 50% of the output current via a DIP switch.
Features
High performance, cost-effective
Supply voltage up to 18-80VAC
Output current up to 7.2A
Self-adjustment technology
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-cicuit protection
Leadshine is a high performance 2-phase stepper drive based on advanced pure sinusoidal current control technology. It takes step & direction or CW/CCW control commands, and is very simple to implement in OEM applications.
stepper features anti-resonance which significantly reduces low-middle speed movement vibration/instability and motor noise. Because of the implementation of 3-state current control (On, Off, and Circulation), drive and motor heating are significantly lower than similar stepper drives on the markets. With the input voltage of 18 - 80 VAC and output current of 1.80 - 7.20 A, DMA860H can drive a wide range of 2-phase stepper motors with high precision at extra smoothness, quietness, and low motor heating.
stepper drive is easy to setup and configure via DIP switches. There are 16 resolution settings from 400 - 51200, and 8 output current settings from 1.80 - 7.20. Also, a user can simply set the idle current to full (100%) or 50% of the output current via a DIP switch.